New Cover Button Assembly Dies for KAM Snaps Press Pliers

Cover buttons are a great way to add a decorative touch to your project. You can cover them with your choice of fabric for a perfect match every time.  Here we've combined our cover buttons with our glue pad disk bracelets to make a beautiful bracelet. (Click here for tutorial.)

Cover buttons are very easy to assemble with the manual assembly tool, included with each pack of cover buttons.  But if you're putting together more than a few, it can be tiring on your fingers.  Here's where our new cover button dies come in.



Our cover button dies are compatible with the KAMsnaps KX8J (or the older KX6A) professional handheld press.  They also work with the KAM DK93 table press with DK93-KX adapter base or the DK98 table press with DK98-KX adapter set. (Not compatible with the basic K1 or K2 pliers for plastic snaps.)

Hole Cutting Punch Dies for Snaps, Rivets & Grommets

Just in, exclusively at KAMsnaps.com!  Punch dies to quickly cut holes for easy insertion of snaps, rivets, and grommets.  Currently available in 2.5mm, 5mm, 7mm, and 10mm holes.  A separate top die for each size, but the same bottom die can be used for all 4 sizes.

Photo courtesy of Diana G.

These punch dies fit the following tools:

•  KX professional handheld press

• If you have a DK93 table press, you will need the DK93-KX adapter base to use these dies.

• If you have a DK98 table press, you will need the DK98-KX adapter set to use these dies.

• Not compatible with the basic K1/K2 KAM pliers for plastic snaps or other tools sold off this site.