KAMsnaps Black Friday / Cyber Monday Sale

Use one of the following coupons on your entire order at KAMsnaps.com.  Save on plastic and metal snaps, grommets, rivets, key fob hardware, snap pliers, table presses and more!

10% off any order - coupon THANKS10

15% off any order $100+ - coupon THANKS15

20% off any order $350+ - coupon THANKS20

30% off any order $1000+ - coupon THANKS30

1 coupon per order. Coupons cannot be combined.

Expires November 26, 2018.

Have a happy Thanksgiving holiday!

10% Off Coupon for KAMsnaps Size 20 Glossy Plastic Snaps

Several of our snap colors in size 20 glossy sets are already marked down over 15% at KAMsnaps.com. Check the Sale section for markdowns on hundreds of products.

Use coupon SNAPS to take an additional 10% off ALL snaps in our Size 20 Glossy Sets collection when you order $20+ from that section.  Limited time only!

20% OFF SALE: All Rivet, Grommet & Cover Button Dies for KAM Snap Press

All rivet dies, grommet dies, and cover buttons dies for your KAM snap press are marked down 20% this month at KAMsnaps.com.  These dies are part of our KX-series, which means they'll fit the following KAM tools:

Read the Required Tools section on each die product page for direct links to compatible tools.

Watch these videos to see just how easy it is to use our dies to set rivets, grommets, and cover buttons perfectly every time.

How to Install Rivets

How to Install Grommets 

How to Set Cover Buttons

 

 

New Cover Button Assembly Dies for KAM Snaps Press Pliers

Cover buttons are a great way to add a decorative touch to your project. You can cover them with your choice of fabric for a perfect match every time.  Here we've combined our cover buttons with our glue pad disk bracelets to make a beautiful bracelet. (Click here for tutorial.)

Cover buttons are very easy to assemble with the manual assembly tool, included with each pack of cover buttons.  But if you're putting together more than a few, it can be tiring on your fingers.  Here's where our new cover button dies come in.



Our cover button dies are compatible with the KAMsnaps KX8J (or the older KX6A) professional handheld press.  They also work with the KAM DK93 table press with DK93-KX adapter base or the DK98 table press with DK98-KX adapter set. (Not compatible with the basic K1 or K2 pliers for plastic snaps.)

Hole Cutting Punch Dies for Snaps, Rivets & Grommets

Just in, exclusively at KAMsnaps.com!  Punch dies to quickly cut holes for easy insertion of snaps, rivets, and grommets.  Currently available in 2.5mm, 5mm, 7mm, and 10mm holes.  A separate top die for each size, but the same bottom die can be used for all 4 sizes.

Photo courtesy of Diana G.

These punch dies fit the following tools:

•  KX professional handheld press

• If you have a DK93 table press, you will need the DK93-KX adapter base to use these dies.

• If you have a DK98 table press, you will need the DK98-KX adapter set to use these dies.

• Not compatible with the basic K1/K2 KAM pliers for plastic snaps or other tools sold off this site.

 

New Engraved Two-Toned KAM Snap Fasteners

These are just a few of the two-toned engraved snaps now available at KAMsnaps.com while supplies last.  From atoms to Christmas ornaments to foxes, mermaids, unicorns, anchors, cupcakes, and even snaps that look like buttons, we have something for everybody.  We even have geeky snaps!  Click here to view our entire engraved selection.